Maybe you have decided you want to give the DIY Route a try and fabricate your own turbo setup. Use these images to aid you in laying out your setup.
| Part #2 Of the DIY Pics! |
|
All The Turbo Parts Sitting on The Bench. Ready For a Coat of Paint |
 |
Turbo Headers, Downpip and Cross Over Taped up and Wire Brushed. |
 |
Vic Spraying a coat of tremclad paint onto the parts. |
 |
U bend, 2.5" Merge Pipe and T4 Turbo Flange (Passanger side turbo header) |
 |
Different view of the passanger side turbo header. |
 |
Paint is dry on the parts and they are ready for any heat wraping |
 |
Applying the Exhaust Header Wrap to the downpipe. |
 |
Wraping up the Passanger side header in heat wrap. |
 |
Driver side turbo header installed onto the engine. |
 |
Tapping the Oil Pan. |
 |
Cross over pipe and 2.5" Flex Joint Mounted to the driver side turbo header. |
 |
Oxygen sensor installed into Driver side Turbo Header. |
 |
1.5" Wastegate dump pipe, routed back to the 3" Downpipe. |
 |
Vaccum line from the turbo to the wastegate. |
|
Top View of Turbo install, Gives you an idea of the spacing required to build a turbo kit for yourself |
 |
More engine and interooler shots of the installation. |
 |
Turbo top view. |
 |
Spacing between the cold side and the downpipe. |
|
46mm Wastegate has been installed where the original radiator overflow bottle was. |
|
Starting on the cold side after the interooler and laying out piping. |
